Cirrus-logic CS42L51 Manual do Utilizador descarregar pdf (Página 68)

68 DS679F1

CS42L51

Cushion Threshold (CUSH[2:0])

Default: 000

Function:

Sets a cushion level below full scale. This setting is usually set slightly below the maximum (MAX[2:0])

threshold. The Limiter uses this cushion as a hysteresis point for the input signal as it maintains the signal

below the maximum as well as below the cushion setting. This provides a more natural sound as the limiter

attacks and releases.

Limiter Soft Ramp Disable (LIM_SRDIS)

Default: 0

0 - Off

1 - On

Function:

Overrides the DAC_SZC setting. When this bit is set, the Limiter attack and release rate will not be dictated

by the soft ramp setting.

Note: This bit is ignored when the zero-cross function is enabled (i.e. when

DAC_SZC[1:0] = ‘01’b or ‘11’b.)

Limiter Zero Cross Disable (LIM_ZCDIS)

Default: 0

0 - Off

1 - On

Function:

Overrides the DAC_SZC setting. When this bit is set, the Limiter attack and release rate will not be dictated

by the zero-cross setting.

CUSH[2:0] Threshold

Setting

(dB)

000 0

001 -3

010 -6

011 -9

101 -12

101 -18

110 -24

111 -30

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 87 88

Sem comentários

Cirrus-logic CS42L51 Manual do Utilizador Página 68